How to use the paver calculator
Prepare the values for this calculation
Estimate paver count from paved area, paver face size, joint allowance and waste. Use the formula below to check that it answers your question. Read the input units before transferring figures from a statement, measurement or dataset.
Enter and check each input
- Area (ft²): enter a value at least 0. Use the unit named in the label or selected above. Do not leave this required field blank.
- Unit width (in): enter a value at least 0.001. Use the unit named in the label or selected above. Do not leave this required field blank.
- Unit height (in): enter a value at least 0.001. Use the unit named in the label or selected above. Do not leave this required field blank.
- Joint / gap allowance (in): enter a value at least 0. Use the unit named in the label or selected above. Do not leave this required field blank.
- Waste allowance (%): enter a value at least 0 and no more than 100. Use the unit named in the label or selected above. Do not leave this required field blank.
The input table gives a complete example. Keep units and time periods consistent across related fields.
Calculate and resolve any input error
Choose Calculate after entering the values. Changes also update the answer after a short pause. If an error appears, follow its message, correct the field and calculate again. Reset restores the example values.
Interpret the answer
Check Units required first. With the unchanged example inputs, it is 865 units. Compare the additional metrics with the primary result; each has its own label and unit.
Compare and keep a useful result
For a controlled comparison, keep every other example input unchanged and change Area (ft²) from 200 to 220. The resulting Units required is 952 units. This illustrates the equation’s response to that input, rather than a forecast of real events.
Read the chart’s axis labels and data table. A scenario curve changes one stated input while holding the others fixed; it does not add external observations. Use Download graph to save an available chart as a PNG.
Use Copy result or Download CSV to keep the answer. Share tool shares the page address without placing your input values in the URL. Recheck inputs and assumptions before using the result for a decision.
Paver Calculator formula
Unit count = ceil(area × (1 + waste%) ÷ effective unit module area).
Inputs and units
| Input | Format / range | Example |
|---|---|---|
| Area (ft²) | minimum 0 | 200 |
| Unit width (in) | minimum 0.001 | 8 |
| Unit height (in) | minimum 0.001 | 4 |
| Joint / gap allowance (in) | minimum 0 | 0.375 |
| Waste allowance (%) | minimum 0; maximum 100 | 10 |
Worked example
Using the example inputs above, the units required is 865 units.
- Units required
- 865 units
- Effective unit module area
- 0.254449 ft²
- Area incl. waste
- 220 ft²
Results and assumptions
The output uses the units required convention and formula shown above. Match the entered units and source assumptions when comparing results.
Use consistent units and confirm material specifications, site conditions and applicable building requirements before purchasing or construction.
Fix an input or unexpected result
Area (ft²) is required. Enter area (ft²) using the format and bounds in the input table. Zero and an empty field are different: use zero only if it is allowed and represents your data.
If your answer differs from the example, choose Reset and compare every field, including selected units and options. Check percentage versus decimal entry and whether values describe the same period. Round only the final displayed answer when reproducing the formula.
If a discrepancy remains, report the calculator issue with the page address, non-sensitive example inputs, actual result, expected result and a reference for your calculation.